BEZZERA BZ16 ELECTRONIC DOSING
The latest edition of the BZ series targets small commercial environment where slightly larger capacity is required.
The Bezzera BZ16 has the fastest start up time for a 2-litre boiler.
Compare to an E61 heat exchanger system. The required heat up time is drastically reduced to around 15 to 18 minutes instead of 20 to 30.
Double Pressure Gauge
Features an important brew gauge and a steam boiler gauge, useful for identifying any anomalies during brewing and readiness of the machine.
2 Litres Boiler
A full 2 litres size, to ensure better back to back thermal stability.
It’s a heat exchanger heating system and it’s designed to run at a slightly higher temperature at initiation.
Followed by a steady reduction of temperature to strike an equilibrium in a standard 25-30 seconds extraction.
This expands and fully blossom all the characters in the coffee. At the same time, release aromatic notes only found in lower temperature and reduce the bitterness of coffee.
A safe material with natural anti-microbial properties to continuously kill greater than 99.9% of bacteria that cause hospital-acquired infections, keeping water in the boiler always potable. One of the most conductive metal on earth, making the machine very efficient in starting up and recovering from lost heat. Will never rust like Stainless Steel, or release lead from Brass, will only oxidise and increase its antimicrobial properties as its age.
The Bezzera BZ line is known to express brighter notes with greater clarity as compared to standard E61 machines.
Being a heat exchanger means that the turnover of water usage is faster, meaning only fresh water will be used for for brewing.
With its fast start up time, it means that coffee can be brewed sooner using less power.
Multiple industrial grade controllers, sensors and heating elements are directly placed within the grouphead to ensure the temperature are maintained within the optimal range.
The boiler is larger than the BZ10 and BZ13, so water temperature remains more stable after a large amount of usage.
Faster thermal recovery.
As this is not a thermosiphon system, the drop of temperature in the boiler after extensive use will not drop the temperature at the grouphead. The grouphead’s temperature is maintained by individual heating elements. This allows users to repeat shots back to back more rapidly.
Due to the design of the heat exchanger, minimal cool flushing is required.
The design does not hinder the steam power.
Easy Portafilter Fastening.
All BZ machines are now provided with a new special gasket for the grouphead, which makes it very comfortable and easy to lock the portafilter.
End users will appreciate this new upgrade on the “BZ” range, you feel the machine more professional when you fit the filter holder compare to any other machines.
Users may feel it’s not tight, at 7 O’clock lock, but they are sealed.
Improved Grouphead Cleaning
Some users may find it difficult to remove the shower screen from common groupheads like E61 or levers by prying. Damaging the rims of the screen in the process.
The BZ had an improved design and resolved the problem.
BZ Shower screen can remain in pristine condition after removal, saving cost.
The gasket remains in the grouphead after the shower screen is out. The exposed gasket can be cleaned directly without risk of damaging from removal. Saving time and cost.
As there’re more than one heating element to share the duty of heating.
The main heating element at the boiler, which is a major component is less likely to be overworked and overheated.
BZ groupheads are designed in a way to be easier and less expensive to repair than an E61 machine.
The Bezzera BZ16 Electronic Version has a dosage panel for programming and auto dosage features.
Bezzera BZ16 is suitable for any small to medium size environment.
It is a heat exchanger system; users can brew and froth milk at the same time.
The difference between the Bezzera BZ16 and the BZ13:
The BZ16 has a larger capacity boiler, so water temperature remains more stable after large usage. In this version, it comes with a vibration pump and works with water tank only.
It is the suitable for small cafes, offices, bistros and restaurants.
Warning: Be careful of hot surfaces, water and steam at all time.
Do not allow vibration pumps to activate for more than 2 minutes, allow half amount of rest time for any long duration of activation.
|Grouphead..||Bezzera’s Thermal Efficient Grouphead|
|Boiler Type..||Bezzera’s Improved Heat Exchange System|
|Pump type..||Commercial Grade Vibration Pump|
|Quick Start Up..||Yes|
|Operation..||Electronic Control Panel|
|Indicator Lights..||On, off, heating|
|Boiler Capacity..||2 Litres|
|Water Tank Capacity..||4 Litres|
|Water Tank Access..||Flap open from top|
|Plumb in connection..||No|
|Pressure Gauge..||Brew and Boiler|
|Chassis Construction..||Stainless steel AISI 304 body|
|Steam/Water Valve Type..||Turn knobs|
|Low Water Cut Off..||Lights|
|Low Water Indication..||Lights|
|Heat Resistant Wands..||Heat Proof Grips|
|Number of Portafilter Holders..||1 Double Filter Holder, 1 Single Filter Holder with both Single and Double Baskets|
|Free Accessories..||Metal Blind Filter, Coffee Powder Scoop and Plastic Tamper.|
|Place of Production..||100% Italy, Milan by Bezzera|
|Place of Assembly..||100% Italy, Milan by Bezzera (By Hand)|
|Dimension (W x D x H)..||320 x 450 x 400 MM|
|Net Weight..||22.7 KG|
|Gross Weight..||25.2 KG|
|Power Supply..||220-230V 50-60 Hz|
|Nominal Power..||1250W – 1450W|
Link to official website: BZ16